Leuco - Panel Sizing Saw Blades HW - U-Cut "TR-F" - Sizing Saw Panel Unicut

Brand: Leuco

Design

Up To ØD=360, 10 Degree Hook Angle.

From ØD=380, 15 Degree Hook Angle.

Tooth Configuration: Triple Chip / Flat "TR-F".

Cutting Material: HW HL Board 04 Plus.

Machine / Application

Panel Sizing Saws.

For Sizing Cuts in Plastic-Laminated Panels.

Advantages

Improved cutting quality thanks to optimized cutting geometry.

Noise-reduction thanks to laser ornaments.

Notes

Specifically, for plastic-laminated panels and plywood in single sheets and stacks.

NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42.

NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120.

NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120.

Product Variation:

LE1104378192906

Ø D = Cutting Circle Diameter: 320 [mm]
B = Cutting Width: 4,4 [mm]
b = Body Thickness: 3.2 [mm]
Ø d = Bore Diameter: 65 [mm]
Z = No. of Teeth: 60
NL = Pin Holes:            2/9/110
Hook Angle = Hook Angle: 10 [°]
Tooth Geometry = Tooth Configuration: TR-F
LEUCODUR = Cutting Material: HL Board 04 plus
Machine/Type: Biesse, Selco EB 80

LE1104348192916

Ø D = Cutting Circle Diameter: 380 [mm]
B = Cutting Width: 4,8 [mm]
b = Body Thickness: 3.5 [mm]
Ø d = Bore Diameter: 60 [mm]
Z = No. of Teeth: 72
NL = Pin Holes:            2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Hook Angle = Hook Angle: 15 [°]
Tooth Geometry = Tooth Configuration: TR-F
LEUCODUR = Cutting Material: HL Board 04 plus
Machine/Type: Homag (Holzma)

LE1104378192969

Ø D = Cutting Circle Diameter: 380 [mm]
B = Cutting Width: 4,4 [mm]
b = Body Thickness: 3.2 [mm]
Ø d = Bore Diameter: 80 [mm]
Z = No. of Teeth: 72
NL = Pin Holes:            2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
Hook Angle = Hook Angle: 15 [°]
Tooth Geometry = Tooth Configuration: TR-F
LEUCODUR = Cutting Material: HL Board 04 plus
Machine/Type: Gabbiani, SCM, Selco